Questions & Answers for: Buick Rendezvous removing hose

replacing a thermostat running hot due to bad thermostat You're going to lose some coolant, so have a bucket or other container ready. Follow the upper radiator hose to the point where it's connected ...

I need to change the thermoustat in my 2004 rendezvous I see there is very little clearence to remove it what all is involved to do this task the thermostat is usually located on the top of the engine

How do I flush the radiator in a 2002 Buick Rendezvous. Need all the steps. Well you can purchase a Prestone Flushing Kit, that includes a T valve with a cap that you can remove to connect a garden ...

...hose off by removing/loosening the clamp and pulling the hose off. Sometimes it's easier to use a screwdriver to pry the hose off. Be careful though not to damage the hose. 3. There should be 2 bolts ...

thermostat replacement 2002 rendezvous Thermostat Removal & Installation 3.4L & 3.5L Engine To Remove: Drain the coolant below the level of the thermostat. Remove the air cleaner and duct ...

I own a 2004 Buick Rendezvous, its a 3.4 liter engine and it's leaking coolant from an elbow on the engine firewall, on the passenger side. It only happens when the heater or the a/c is on. Would ...

ok i got the first answer to where the water pump was located now please tell me where in the heck is the termastat located and it's difficulty in replacing it...thank troy Follow the upper ...

...hose that connects to the throttle body, remove electrical connectors that are in the vicinity, remove your throttle body, after removing the throttle cables. with this all removed the whole housing ...

how to remove a radiator Engine is cool! drain coolant drain cock is at lower driver side .remove air cleaner.remove the electrical conaction. remove right side diagonal brace remove upper radiator ...

gas leaking on gas tank where filler tube goes how can I fix it myself it has just started leaking JB weld maybe Fiber glass. The hose has to be replaced. if it is the metal tube, then you can use JB ...