Questions & Answers for: removing feed roller shaft

Question about P4350 All-In-One InkJet Printer

2 Answers

...feed roller,this becomes "glazed" with the additives in modern papers. To gain access remove the power supply remove 1 screw holding its retainer in position and remove it. Remove the white gear on ...

Ad

Question about LaserJet 2200dn Printer

1 Answer

feeding through to print. Remove the paper cassette and the toner. Turn the printer upside down and look at the feed roller. It should NOT spin freely, drive tabs may be broken off of the roller shaft

Ad

Question about ScanSnap Manager

2 Answers

...big feed roller. Remove the feed roller and the axle its attached to. Behind the geared wheel connected on the left of the axle you will find a tooth missing. Its the drive gear for the feed

...feed roller replacement - how to... There are 2 tires on one shaft and a spring. Releasing the white clip on right hand side (like HP) does nothing useful. I expect I'm going to have to take off the ...

Question about PSC 1610 All-In-One InkJet Printer

2 Answers

feed roller ( small black one in contact with paper) was not rotating, Also when the back cover is removed the roller also did not rotate. I took apart the printer and found that a white gear with the

Question about FS-4000DN Laser Printer

1 Answer

...feed roller and pickup roller) Procedure 1. Remove the paper cassette. 2. While pushing the lock and then slide the paper feed roller pin. 3. While pressing the lever and then remove the paper feed ...

Question about Phaser 4510 Maintenance Kit Maintenance Upgrade Kit

2 Answers

...Feed Roller. Slide the roller off of the shaft and discard the roller. paper tray shaft Remove a new roller from the package, and slide the roller onto the shaft until the retaining clip fits into ...

Question about WorkCentre M15i Laser Printer

2 Answers

...feed roller/shaft/clutch and the ADF Separation Pad/Roller. Should be 002N02001 for the Feed Roller Assembly and 22N1487 for the Separation Pad About $50 total for both parts Good Luck and Thank You ...

...posible residual and then cut 3 1/2” of electric tape and split about the wide of the roller and roll on the roller in the same way that it move to feed the paper.Casio NR-8TE AND IS WORKING FINE

Question about Corp Aficio SP C231N Laser Printer

1 Answer

...feed roller on RICOH Aficio SP C242DN ? how to change feed roller on RICOH Aficio SP C242DN 1. remove all the cartridges. 2. remove the waste toner bottle. 3. rear cover 4. left cover 5. paper feed ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...