...jag stype 3.0 Hello To replace water pump : Raise the car 1- Drain cooling system. 2- Remove drive belt tensioner clip (if there is one) 3- Remove accessory drivebelt * Rotate the belt tensioner ...
...type noise. I've removed the belt to ensure that the noise was not generated by the idler pully, water pump and alternator. The car runs fine at higher rpms and the noise appears to go away. Any ...
...of the offending part until it starts to turn. Check for this by removing the drive belt when the engine is cold and try to turn each of the pulleys (except the crankshaft pulley). Hope this
...type jag trying to change serpintine belt.do you loosen tensioner pulley with a tool or loosen nut at the bottom of pulley with wrench. Dont loosen the bolt at the bottom. The tensioner is spring ...
type 3.0 pls. comment. jerry Well the let me just say that at 100k miles your plugs are due...But you can do this yourself 8-10 ea....I would recommend that you have the transmission flushed for about
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
