Questions & Answers for: removeal of motor cover

...motor insulating cover screws. Remove the blower motor insulating cover. Pull the retaining tab down and rotate blower motor counterclockwise to remove. To Install: Position the blower motor and turn ...

Ad

cover in the same manner. Remove the blower motor assembly. To install: Install the blower motor assembly. Connect the two halves of the access cover together using the three flange clips. Using black

Ad

...motor cover Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal ...

Question about 1997 Grand Am

1 Answer

...motor cover, make the cut just the thickness of the cover, which is1/ 8 inch (2mm) thick. Cutting deeper than that may damage the cooling tube. For 1992-98 vehicles, partially cut the blower motor ...

Question about 1997 Grand Am

2 Answers

...motor cover, make the cut just the thickness of the cover, which is1/ 8 inch (2mm) thick. Cutting deeper than that may damage the cooling tube. For 1992-98 vehicles, partially cut the blower motor ...

Question about 2001 Jimmy

2 Answers

...motor access cover screws. CAUTION Do not cut any deeper than necessary in order to remove the access cover. Cut through the access cover on the cut line using a sharp utility knife. Disconnect the ...

Question about 1998 Windstar

1 Answer

...motor cover. Remove the blower motor retaining screws. Remove the blower motor from the A/C evaporator. To install: Install the blower motor in the A/C evaporator and tighten the retaining screws ...

Question about 1995 Astro

1 Answer

...cover in the blower motor area. Cut the acoustic cover between the 5 clip lands. Retain the piece of the acoustic cover for reassembly. Remove the cooling tube from the motor. Remove the screws that ...

...motor access cover screws. CAUTION Do not cut any deeper than necessary in order to remove the access cover. Cut through the access cover on the cut line using a sharp utility knife. Disconnect the ...

...cover. Disconnect the windshield wiper motor wiring harness by separating the plastic wiring connector. Remove the three bolts that secure the wiper motor to the vehicle's body. Pull the motor ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...