Question about Quilter's Dream 6003Q
...remove the housing on the left side of the machine that covers the needle assembly. This will make it a bit easier, but still, be gentle.) After removing the housing, you will see a black metal piece ...
...Watch the thread going onto the bobbin and give it a nudge with your finger tip to ensure the thread fills top, middle and bottom of the core evenly, you don't want it all on the bottom or all in ...
...Watch the bobbin and give the thread a nudge with your finger if it starts to fill too much in the middle, you want a nice even wind top middle and bottom. When bobbin is fully wound, remove it ...
Question about 2007 Mechanical Sewing Machine
...watch?v=usl9t7ijJ6o If you don't accomplish winding here is a possible fix. On the top of the machine there are screws to hold it on. Once you remove the top look where the winder comes out. Look and ...
Usually answered in minutes!
175 Questions
46 Questions
36 Questions
24 Questions
21 Questions