Question about DUAL CASSETTE A/R 110/220 Single Dual Cassette Deck
...remove the cassete an push play, one of the spindles turns. Can I repair this myself? What do you recommend? Thanks! Jon Could be a worn out belt? The cassette loads it the drive down too much. Hence ...
of those wires were exposed and touching the board itself. I placed electrical tape around the exposed wire and tested the volume again and problem was solved! now I can use my remove with no problems
Question about DUAL CASSETTE A/R 110/220 Single Dual Cassette Deck
...tape guide rollers). Keep the parts together in a save place. Then remove the head bracket. Behind the heads, the drive belt is located. Remove the old one, clean the small and large wheel with some ...
Question about DUAL CASSETTE A/R 110/220 Single Dual Cassette Deck
...tape deck, Model X-3. The capstan shaft won't turn. Consequently, the tapes won't move. Any suggestions? That's a rarity but easily fixed. Before pulling anything apart spray some penetrating oil ...
Hi, I have a TEAC R-H300 Casette Deck. Could you possibly advise me how I can assess the Heads, Capstan and Pinch Roller in order to clean them directly? Unfortunately I tape that was playing got ...
...on one of those the other day. The unit needs other maintenance besides the belt- Flywheels need to removed and oiled and capstan shafts inspected and cleaned- I don't know how many ask me how to put ...
...mechanical parts to get to the belt location. It is at this time that the reel table should be removed and rebuilt as the take-up torque due to old felt will be excessive and you don't want to ...
Need to know how to replace belt on Realistic TR 300/ Teac X3 I think they are replaced through the front as in this design the face panel is removed and the capstan and flywheel are there in sight. I
...remove the tape which you may have to disassemble the front panel if you cannot gain access to the tape from the top or bottom. You will need to cut the tape and remove it from the capstan and pinch ...
...engage. The tape wasn't in contact with the heads. Is there some shipping block that needs to be removed? Thanks in advance for your help. Russ Hinis [email protected] These answers are amazing.
Usually answered in minutes!
60 Questions
50 Questions
33 Questions
30 Questions
29 Questions