Questions & Answers for: Uniden remove scanner

Question about BC370CRS Base Scanner

1 Answer

...scanner off,remove the batteries,pull the power cord out of the scanner,push and hold the 2, 9 and hold buttons.While holding the buttons in, plug the power cord back into the scanner.This will reset ...

Ad

Question about BC250D Handheld Scanner

1 Answer

...Remove the card completely, reset the scanner, and then reinstall the card. Make sure its off and the battery and wall adapter are disconnected when removing and replacing the card for safety. After ...

Ad

Question about BC250D Handheld Scanner

1 Answer

...all over for it, it can be under the scanner area. You should not have to take anything apart to find it.On a Sharp copier, I had to remove it completely. Your owners manual should show where it

Question about BC72XLT Handheld Scanner

2 Answers

...the response was the function to remove edit or delete is not present on the range of uniden tv's. press 2,9,hold, all while powering up the scanner....screen will say clear and then power

Question about BC895XLT Base Scanner

3 Answers

...scanner Greetings,The bulbs can be replaced,Remove covers taking care of the speaker wire.  Remove screw for the green wire on disp. board and then the two screws holding the display board in ...

Question about BC244CLT Base Scanner

1 Answer

...remove a noisey scanner programmed number For a temporary fix just press the LOCKOUT key while the scanner is stopped on the noisy channel. For a more permanent fix you can program 000.0000 into the ...

Question about BC248CLT Base Scanner

1 Answer

...remove/override the previously programmed frequency. You can download and print the manual for your scanner, at no cost, here: http://www.uniden.com/pdf/BC248CLTom.pdf For a comprehensive database of ...

Question about BC898T Base Scanner

1 Answer

...scanner was woking fine untill i hit a button by mistake and now it wont scan through the channels ... i dont know what button i pushed! To remove the lockout from a channel, manually select ...

Question about BC60XLT Handheld Scanner

1 Answer

...Weather scanner model. How do I get it back to normal operating ? hello im not really familar with this model you can remove the battery there might be a reset switch behind the battery hope this ...

Question about BC346XT Handheld Scanner

1 Answer

...remove all preprogrammed frequencies on the scanner so I can start with nothing programmed in at all! Turn off the scanner.Simultaneously press 2, 9, and HOLD.While continuing to press these buttons, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communication Experts

John
John

Level 2 Expert

510 Answers

eradiostore
eradiostore

Level 3 Expert

1672 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...