Questions & Answers for: remove projector lenses cover

Question about Proxima DP6810 Multimedia Projector

2 Answers

...projector but i am able to remove the offending dust and FIX the purple splotches. I forget what color it is but its the center mounted lcd that when dirty makes the purple ****. YOU WOULD BE AMAZED ...

Ad

Question about MP 8640 Multimedia Projector

3 Answers

...remove any possible source of interference like wireless phones including your mobile, WiFi AP and the likes. Perhaps you give the first suggestion a try and see if the purple dots disappear when you ...

Ad

Question about VS-45607 45" Rear Projection Television

1 Answer

...lenses, you do not want to remove the cover screen to get there. That is the hard way, but you should be an experienced technician to do this correctly. Why do you think that the lenses need to be ...

Question about 50FX20B 50" Rear Projection Television

4 Answers

...projector, or you have a bigger mess. dlp projectors have sealed optics. don not use anything on the lenses but dry compressed air (like canned air). the surfaces scratch very easily. but you can use ...

Question about D52W19 52" Rear Projection Television

1 Answer

lenses (there are three) will be quite obvious. I clean mine with typical glass cleaner and SOFT paper towels. PAY ATTENTION not to allow any liquid to drip into the projector below or you may disable

Question about 51F500 51" Rear Projection HDTV-Ready Television

2 Answers

...projector. Does the screen come off? Also I am very good with electronics. Is there some settings other than what is in the onscreen menu I can do to clean up the image? Thanks a the trim on the ...

Question about LP 580 Multimedia Projector

1 Answer

projector works fine and everything, but the inner lens appears to have some dust in it or something, making it look like there are blue and red specks on the screen. Is it possible to disassemble the

Question about LP 580 Multimedia Projector

1 Answer

lenses. My RCA rear projection uses a 7/64" allen key. take the speakers' cover off and then remove (I think) the three screws below the button pannel, and 2 on each side on the back on button pannel.

Question about PLV-Z4 Multimedia Projectors

1 Answer

remove the top cover, then at the bottom right side, if your lense is pointing away from you, is a little switch, that you push down, its circular. Push that down, and then put everything back, and it

...projector upside down & remove the bottom cover. CAREFULLY remove the internal lenses with a CLEAN, lint-free cloth. Wrap each lens in a separate cloth, as the lenses can shatter if exposed to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...