power steering fluid reservoir Remove cap and fill reservoir with GM Power Steering Fluid (P/N 89021184) or any fluid a knowledgeable parts department says is compatible. It may not look like much but
...remove power steering belt pulley to change the water pump? no, just remove the belt, then the cover over the waterpump then the waterpump pulley,NOTE; loosen waterpump pulley bolts before removing ...
...power steering pump. On the 3.8 it is on the front of the motor near the water pump. It is located behind the large crankshaft/harmonic dampner or pully on the belt drive end of the engine. You have ...
Where is the cam sensor on a 2004 Chevy impala Passenger side. down, behind the power steering pump. Remove the pump first.
Question about 2004 Impala
power steering to just stop working with no warning signs? The pump is probably not the problem if its not leaking in a big way . However its not cirulating through the steering box . The steering box
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions