Questions & Answers for: how to remove platen

Remove platen on Swintec 8011 typewriter Need to remove platen in order to clean out some accumulated labels and other gunk stuck beneath it. I can't remember which models have which features, but ...

...Remove the platen by squeexing the black plastic retainers at both ends of the platen and lifting it out. Look for debris under the platen, press paper up key and see if the gear on the left end is ...

remove the platen. There is a lever at each end of the platen push them down and remove the platen. Then inside the case on both sides are levers, pull them towards you and remove the case. The levers

...remove the Platen to remove paper. I noticed that there are labels stuck under the platen on the silver paper level. I have not been able to remove the platen. Any suggestions????? We have the ...

...the printer flashes up Tech Access On. The menu path to the Platen Calibration is; TEST>DIAG>CAL ENGINE>PLATEN, then follow the instruction on the display to remove the paper and ribbon ...

...remove the platen. What am I missing? I dont think that you are missing anything, but you might want to go to Dewaltservicenet.com and download a breakdown for this tool. it might be that the platen ...

...makes a loud buzzing sound. Help! If you can remove the platen, roller, you may find a label stuck on the deflector. Remove the label from the deflector. Make sure the deflector is installed

how to remove platen On both ends of the platen there is black plastic latch squeeze them and lift out the platen. DickyO

...remove the paper and after setting back it says that platen cover is open. i dont even know platen cover is , and dont know what to do about it plz help me out You may not have gotten all the paper ...

remove the platen? the remove by various methods, you will have to remove the covers each end of the platen will be caller holding platen in place. www.ask.com/mfg.name/make/model/how/to/remove/platen