Questions & Answers for: remove pins garage door opener

How do I remove the pin that holds the worm gear in place? You can use a slightly smaller punch or I have filed the point off a nail and used it to drive the pin out.

garage door opener hi, i just replaced the helical and drive gears in my opener. Now the door opens and immediately closes only 1 foot. I can't get it to open all the way. Any suggestions? I've ...

...door or chain ...it has been working with no problems for 9 years....o problems...I would think if it was a gear problem we would have eperienced difficulties leading up to this ...it went from ...

...garage door opener chain adjustment? My door will not raise or lower. The motor is working but the chain may to be slipping possibly because it is loose? I can't see how to adjust it. Anyone know how ...

are there any ideas? He need to use a punch the same size as the pins. I have even used a nail the same size with the point filed off. Tell him he only need to remove the bottom one for the drive gear

garage door. I've removed the motor and have taken everything except the last washer, or collar before the gear and it appears to be stuck. I can't get it to budge at all. Is there a tool or something

the worm gear spins but does not turn main gear... The worm gear spins but does not turn main gear The drive gear must be stripped.

...garage door opener runs but the sprocket is not moving is there a shear pin or something that could be broken? The drive gear is stripped. It is a white nylon gear and is just in front of the

garage door opener opened but will not close. Motor hums but door does not move. Ensure proper installation. Ensure gears in main control head box are not worn out, The main drive flat gear is plastic

...garage door cliks then buzzes lights come on but nothing happens . I have a older model that doesent have light sensors and I can turn gears and motor by hand to lift door so nothing seems to be ...