Questions & Answers for: Chevrolet remove lock

Question about 1989 Celebrity

1 Answer

...lock to remove buzzer switch. On 1991-92 models, switch and spring clip are one assembly. Turn lock cylinder to Run position on 1989 models or Lock position on 1990-92 models, then remove lock ...

Ad

...lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock. Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the ...

Ad

Question about 1996 Cavalier

1 Answer

...lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock. Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the ...

Question about 2001 Suburban

1 Answer

...lock module assembly. Remove the passkey connector from the lock module assembly. Remove the connector from the electric park lock, for vehicles equipped with floor shifters. Remove the ignition ...

...lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock. Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the ...

...nut to the steering wheel Remove the lock plate retaining ring then the lock plate with a lock plate compressor Remove the directional switch Remove the torx style bolt Slide out the lock ...

Question about 1977 Silverado 2500

1 Answer

...Remove the lock plate retaining spring using a Lock plate press. Remove the directional switch screws (3).. Lift that switch out of the way to remove the ignition lock screww Pull out ign Lock ...

...Remove all burrs in and around lock module assembly (15) and lock cylinder (17). From inside module assembly (15) push on locking tab and pull lock cylinder (17) from lock module assembly (15) and ...

Question about 1997 Blazer

1 Answer

...lock assembly. Remove the ignition switch mounting screws and the ignition switch from the steering column. Ignition switch removal/installation To Install: Install the ignition switch on the lock ...

Question about 2002 Monte Carlo

0 Answer

...lock cable. Remove the park/lock cable from the ignition switch by pulling on the cable. Important: You cannot remove the Passlock(TM) electrical connector until the lock cylinder is removed 9. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...