Question about 24032\24036 Top Load Washer
hoses (have some towels ready) You may find something in one of the two pumps. Remove the impeller, by prying off the center cap and removing the center bolt. Lift off the impeller and look for debris
...Kenmore Elite Oasis washer in Aug of 2006. I've already had to replace the main board in my dryer. And now I'm having problems with the washer and of course it's not under warranty any more. Anyway, ...
impeller. The second part is too remove the washplate by popping the center cover and removing the 7/16 bolt. Then to grasp the basket and lift sharply on it to pop out the washplate enough to remove.
Question about Oasis 27042 Top Load Washer
...remove the basket and check for an item stuck between the spin basket and the outer washer tub. The second and third images show procedures for removing the basket on the Oasis washer depending on ...
...remove and clean the filter. Then you need to check out the pump. Take a flashlight and look into the suction port on the pump. Check the impeller for broken or missing blades and make sure that the ...
Question about Oasis HE 27082 Top Load Washer
...impeller and there is definite damage to one of the wings but the others are intact. I ran it through another wash and it again stopped this time with no change in the pump. I ran it through a ...
Question about Oasis HE 27082 Top Load Washer
...is in the impellor of the pump. Remove the hose to retrieve the item before it damages the pump impeller. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE ...
Question about Oasis HE 27062 Top Load Washer
...remove loose change .I have removed the plastic cap and removed one bolt but it still doesnt lift up, help ...
...impeller. Kenmore Elite Oasis/Whirlpool Cabrio/Maytag Bravos Wash Impeller Removal Use a 1/4˝ Allen wrench and loosen the rotor mounting screw as far as it will go. The screw is captive and ...
...impeller enough to remove some water. in all just replace pumps motor. in the process might find the culprit that could have caused problem. also take a good look inside pump housing. hope this
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions