...it isn't spinning or just what is going on. it's not pumping out remove back and lean washer forward remove pump and clean also ck impeller should turn free but not free wheel if it does replace ...
Question about Cabrio WTW6600SBT Top Load Washer
...remove the hose. The black hose closer to you is soft rubber and will take some patience to work with. I would pull the hoses and drain what is left of water at the bottom of the tub. Warning if the ...
its lights. Any ideas ? Check your drain hose for a proper air gap to prevent siphoning and back pressure on the pump and did you check the pump impeller for damage or separation? Is this a Cabrio or
after wash cycle water want pump out Check for a kinked or clogged drain line. The hose can be removed from the pump and the pump can be checked for clogs. Take a flashlight and look into the suction ...
...impeller unless you find a used pump somewhere and remove it yourself. By the time you do all of that it just isn't worth the effort. Sometimes you find the object that did the damage sometimes you ...
Question about Cabrio WTW6600SBT Top Load Washer
...assembly. Use a deep socket if you need to get better purchase. DO NOT use a metal hammer. A pulley puller may be needed to be used to remove the impeller. Write back if you need further help. -- ...
Question about Cabrio WTW6600SBT Top Load Washer
...To gain access to the drain pump you can lay the machine on its front then remove the drain hose and replace the pump if the impeller has gone bad. Please post a comment if need more help. Thanks ...
the washer and pump and plugged up the hose. I never thought a sock could make it past the impeller so if your Cabrio is not draining or spinning check the hose past the pump, you may have an easy fix
Question about Cabrio WTW6600SBT Top Load Washer
...remove small items that fell into the opening around the impeller I have a 6 yrs old Whirlpool Cabrio Automatic washer. Several small items coins and a key fell into the opening around the impeller. ...
Question about Cabrio WTW6600SBT Top Load Washer
remove a few coins in the lint trap. Ran the machine once this morning and it drained fine. Ran it again and we got the LD "long drain" code again. Sounded like the pump was running but nothing coming
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions