...remove head have head checked at machine shop. Clean engine surface good and rise good with brake clean, make sure head gasket is on correct before head goes on bolt down with proper torque and ...
how to replace low beam head light how to replace low beam head light you have to either pull out two retaing pins and remove the lamp assembly on one style grill others need the whole grill removed
...remove head bolts in a cross pattern, take head to machine shop to have head resurfaced, clean mating surface on block, install new head gasket and reverse order to reassemble. Otherwise, for more ...
...head as soon as you remove the cap. If this is the case, your problem will be with a failed head gasket. IN a severe case, you will notice white plums of smoke escaping from the tail pipe during ...
...head. Remove the generator. Remove the oil indicator tube bracket bolt. Remove the generator mounting bracket. Remove the sixteen cylinder head bolts. Remove cylinder heads and gaskets. Clean all ...
replacing sparkplugs on a 2003 YukonXL 5.3 Litre Here's how to remove the spark plugs. Remove the engine sight shield, if necessary. Disconnect the spark plug wire from the spark plug. â?¢ ...
...remove the cylinder head without taking off the intake manifold - 1988 gmc 350 fuel injected Hello, anderplan. In order to remove the cylinder head from a V8 Chevy engine, it is necessary to remove ...
head gasket what prcedure is required for this job? do i need to get the heads worked on as well? Hi Darien, If you are removing the heads it is always best procedure to take the heads for ...
Question about 2006 Sierra 3500
1 TORX® head screw (1) in the upper trim cover (2) before removal. If necessary, remove 1 TORX® head screw (1) from the upper trim cover (2). If a screw is not present, remove the upper trim cover (2)
Usually answered in minutes!
2,225 Questions
1,363 Questions
1,368 Questions
1,418 Questions
1,123 Questions