Questions & Answers for: Roper remove gearbox

...It is not spinning, not catching the clothes and pullingthem down into the water to be washed. remove agitator cap remove boplastic cover underneath remove bolt remove upper portion of agitator ...

...remove lid and body the motor and gearbox are now exposed undo bolt(s) holding spring clips to pump, remove spring clips holding pump to motor(note position for reinstall) unto bolt(s) holding spring ...

...remove lid and body the motor and gearbox are now exposed undo bolt(s) holding spring clips to pump, remove spring clips holding pump to motor(note position for reinstall) unto bolt(s) holding spring ...

roper washing machine the drum is loose and makes lots of noise remove the drum unit and check out as follows: Remove top panel. Most of these have front controls, so the screws on the top back allow ...

cant remove the motor If you have a front loading machine: You can try to remove the front of the machine, this will expose the drum and belt, remove the drum and belt and this will expose the drum ...

...appliance before repairing. There are two screws located on the front corners of the control panel. Remove these screws and tilt the control panel back. There are two clips holding the cabnet to the ...

Drum doesn't turn and makes noise Hello, My machine appeared to wash the clothes but will not turn in the spin cycle. It appears that the gearbox is the problem. Thanks for any help. Tim check you don

won't spin, but does wash it may be the the drive belt or the gearbox for the agitator. check the drive belt first.

Model RTW4641BQ0. Why won't it spin or agitate? will fill and drain.Has to unplugged for controls to turn off. Pic included with model and serial#. Could be gearbox failure or spin clutch solenoid ...

Roper direct drive top load washer the agitator only spins one way and the tub doesn't rock back and forth during wash cycle. I replaced the dogs already and on spin cycle it does fine. Any advice ...