...fork remove headstem and handlebars undo lock nut & ring retaining bearings, at top of fork tube, do not lose bearings which may be loose. withdraw fork from fork tube, do not lose upper bearing race ...
...fork lock? How do you remove and install a new fork lock on a Suzuki boulevard S83 (aka Suzuki Intruder 1400)? YOU WILL NEED TO REMOVE THE TRIPLE TREE FROM THE FRAME TO ACCESS THE LOCK. ONCE YOU GET ...
Question about 2000 FXDX Dyna Super Glide Sport
...Remove upper triple clamp and handlebars. 2.Loosen fork stem bolt and let fork stem drop down approx. 5 inches. Note: On the left side of the steering stem there is a "half moon" indentation that has ...
...I LOCK THE FRONT FORK LOCK? turn the handlebars all the way to the left and then turn the ky to the left position that says lock and then you can remove the key with the forks locked in that
Question about 2000 FXDX Dyna Super Glide Sport
...remove and replace the fork lock cylinder and I have the and the lock works. I have removed the set screw and cylinder will only move out a little bit. Do I force it out I've tried turning forks and ...
...Remove upper triple clamp and handlebars. 2. Loosen fork stem bolt, Let fork stem drop down approx. 5 in. On the left side of the steering stem there is a "half-moon" indentation that has been ...
...Remove upper triple clamp and handlebars. 2. Loosen fork stem bolt. Let fork stem drop approx. 5 inches. (127mm) On the left side of the steering stem there is a "half-moon" indentation that has been ...
...remove fork caps if their diameter is larger the that of the fork tubes leave if thay are the same) slide the top yoke off past steering lock unclip switch wiring coupler. The ignition switch will ...
Question about 2002 FLHR - FLHRCI Road king
...remove the fork lock on a 2002 road king Hi Anonymous, for more information on your question please visit the websites below and good luck: 2002 Road King Fork Lock Malfunction Twin Forum Harley ...
...remove fork tube caps. 8. Loosen all pinch bolts on top and bottom triple clamps and pull fork tubes from triple clamps. 9. Remove brake hose bracket from the bottom of fork stem and bracket. 10. ...
Usually answered in minutes!
165 Questions
193 Questions
115 Questions
114 Questions
96 Questions