Questions & Answers for: remove executive 56 pump impeller

...56 4hp pump how to remove the impeller left or right thread Looking at the face of the pump, the impeller unscrews by turning it counterclockwise. Also, for some strange reason, the 4HP pump gets a ...

pump had pieces hanging out. Like a squashed bushing. Is this fixable? How do you take the rest apart? Thanks You will have to remove the impeller ... this process will also requirre that you put in a

...remove impeller The impeller in my 4 HP, 2-speed Waterway Executive High Performance 56 pool & spa pump has a brass coupling embedded in the back side. This coupling can be unscrewed from the ...

...Executive. I need to remove the impeller. I don't see a place to put a wrench on the motor shaft to keep it from moving so I can turn the impeller. Is there a trick I need to know? Im guessing ... On ...

pump that I am trying to remove the impeller from. I can lock the shaft but the impeller will not turn off by hand. Is there a method or tool to assist in turning off the impeller? Are you holding the

...remove impeller for my waterway 56 pump how do i stop the motor frrom turning so i can remove the impeller This can be very tricky at times. Quite often a sharp blow from a hammer on the wrench will ...

...remove pump and wet end from spa remove outer cover of wet end (small screws) the impeller will be exposed. remove any obstructions and then free it up by turning it if it wont turn motor may be ...

...remove the wet end of the pump from the motor section. The pump is a Waterway Spa Pump Executive 56 Frame 4hp Dual Speed 2" Take the screws off the outer cover fo the wet end. That will expose the ...

...remove the impeller from the motor shaft? If the shaft seal has been leaking the impeller stem may have split due to corrosion. This makes it very hard to un thread the impeller. After removing the ...

...executive 56 frame spa pump? To remove the impeller you first take the front face plate off to expose the impeller. Then isolate the shaft from the motor with a pair of needle nose vise grips and ...