Questions & Answers for: remove dryer gas orifice

Question about DLE5977 Electric Dryer

1 Answer

conversion to lp How do I access the gas orifice? I see no access panel remove the top, and than the control panel, and than the front will come off to expose the gas burner on the bottom right side..

Ad

Question about 7.3 Cu. Ft. 9-Cycle Super Capacity Gas Dryer - White

2 Answers

...tell me how to get to the valve. On my old Kenmore a panel on the bottom just pulled off. I have the same problem ... please help me see (how do I remove front panel on samsung dryer for

Ad

Question about DLG5932W Gas Dryer

1 Answer

...dryer. Remove control panel by carefully releasing plastic tabs which are holding front control panel onto metal support. (Watch out for sharp edges !) You can unplug all electrical plugs, or just ...

Question about DLG5932W Gas Dryer

1 Answer

gas dryer runs but does not generate heat runs in all cycles, removed back plate and there doesn't appear to be excessive build up of dust See if there is something blocking the vent. This will cause ...

...dryer. 2. remove two phillips head screws behind door, just in front of lint filter. 3. Use putty knife to push in dryer top release clips at seam with dryer front, about a inch in from each side. 4. ...

Question about Duet Sport 6.7 Cu. Ft. Gas Dryer

2 Answers

...dryer and we know we need to change the orfice, how do we do this? Do you know if there are any do it yourself instruction manuals or guides available? Or can someone tell me the process? it is very ...

Question about Elite HE4 Electric Dryer

1 Answer

gas valve. some kits are minus the spring. you will most likely have to remove the burner to put the new orifice in. any appliance repair store will be able to order you the kit. have model and serial

...dryer cabinet, remove the drum (watch the belt) and clean around the burner at the bottom. If the orifice (the nozzle that the gas comes out of) is clear and unobstructed, it may be the gas valve ...

Question about DLG3788W Gas Dryer

1 Answer

...line all you should need to do is remove it.(inside a connector by the dryer intake for gas) Just make sure you look at the back plate of your dryer or user manual and check the pressure

remove propane conversion to restore to natural gas Buy a set of orifices and regulator spring for the gas valve in that dryer. The manufacturer should sell them as a conversion kit. It's a pretty ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...