Questions & Answers for: Jeep Grand Cherokee how to remove clock

...the clock spring it will have to be done by a qualified tech since the airbag itself has to be removed. Have the car checked for codes first before making any

and see if connection is bad or replace it all together? It is the clock spring. Need to remove the steering wheel as it is under it. Disconnect the battery for at least 2 minutes to disarm the airbag

...tail light and remove the electrical connector then remove the top globe by twisting it anti clock wise then bend the contacts on the tail light up slightly and install the globe and tail light ...

...Remove it and put the steering wheel on and turn to confirm. You need to disassemble and inspect. I HAVE ACTUALLY MADE THIS MISTAKE MYSELF BEFORE. YOU HAVE TO TAKE THE STEERING WHEEL BACK OFF AND ...

...horn connector that you will push down and turn counter clock wise to unhook,now before you remove nut straighten the steering wheel and lock the steering,remove nut,and using a puller ,off it

...steering wheel the clock pring is a yellow round piece that fitted inside the steering column. there is a snap ring hold the clock spring in place. disconnect the wiring then remove the clock

...culprit. You have to remove the steering wheel to replace it. Just don't turn the wheels to tightly when you remove the steering wheel. or you could damage the clock spring inside the steering

replace the clock spring, how do i do this? 1999 grand cherokee laredo The steering wheel has to be removed to do that. Removing the steering wheel requires removing the airbag, which leads to a whole

...clock spring is the device that transfer power through the rotating steering wheel to the airbag, horn, and other misc, switches that may be on the steering wheel. Your local dealer will have them. ...

...clock-wise to remove it. Go to my website and click on "Contact Us" and tell me which issue you are having so I can help you. Click here: Auto Repair Pull the bezel off. Most just pop off, but look ...