Questions & Answers for: remove channel stays tv screen

...remove the number of the tv channel from the screen I have a URC-3435 universal remote everything is tuned in okay the only problem is when I hit like any channel number it stay on the screen on the ...

...remove and the batteries and check if the channels still are changing.....see if the onboard switch for channel changing is stuck ?..if stuck u can use homemade tools to pull it back......if your tv ...

...channel locks or parental parental permission measures deployed. If so remove them, this includes V-Chip, and Parental lock out on the remote, and check your TVs menu items. What channel are being ...

...channel except pbs stations all we get is a green lock when we work through the menu to unlock code, because we do not have a code. the tv is a screen with black screen in center on all channels. ...

...TV stays on as the sound can still be heard. Initial problem noticed on weak TV channels (using cable box), now weak signal channels are worse, but even strong channels and DVD player are starting to ...

...channel. It's about 4 years old and I lost the original remote and haven't been able to figure how to get it off through the menu on the tv. When it's switched to" Component 1" for my dvd ...

...channel stays on screen in upper left hand corner of my sony 57in hdtv rear projection WITH AN ORIGINAL SONY REMOTE HIT THE DISPLAY BUTTON TO REMOVE THE INPUT ON SCREEN DISPLAY---IF YOU leave it on ...

...bought for this and can have the channel number on all the time , you may be able to remove this using this manual. https://docs.sony.com/release/KV27S10.PDF it may help you to read this to remove

...remove C03 from TV screen Just switched out my cable box and now the Channel 03 stays in the bottom right corner of the screen. you go to the menu and go to the section block any channel. before read ...

...stays on (no blinking, no green light), picture goes blank after a second and channel number in upper left corner flashes on and off. Unplugged TV for 30 minutes, turn it back on and same problem. ...