Questions & Answers for: how do you remove the blade on a dewalt sawzall

...remove the blade clamp? I see two pins Hello Hollister, on this peticular sawzall they are using a roll pin to hold the blade holder on. If you remove the blade clamp screw, you can move the blade ...

...Blade is stuck can not remove, removed Scew part # 99164-06. Blade is still stuck, blade will move side to side, back and forth but will not slide out. Any ideas It sounds like the set-screw may have ...

...blade assembly on a dewalt 18v Reciprocating Saw Sawzall Remove the foot, remove the boot (and yellow lever), pull shaft out all the way (so you have more room to work with), remove the spring clip ...

broken blade in dewalt sawzall Remove broken blade, install new one. These blades don't change themselves, unfortunately.

...remove it. Slide the insulator and blade clamp lever off exposing the gearcase. At this point you can remove the gearcase from the handle and can access the entire tool. Removing the gear assembly ...

...it will fall out. Clean and blow out blade port before inserting another blade. How to Remove Stuck Blade on Sawzall Hatchet eHow Troubleshooting Your Malfunctioning Reciprocating Saw DoItYourself ...