Questions & Answers for: Harley Davidson FXDWG Dyna Wide Glide remove baffles

need to remove and install inner primary cover how do you pull the sprocket and clutch to remove the broken inner primary cover to replace it with a new one? any special tools needed? You really need ...

need to see dye gram how to remove gear box for dyner wide glide On a Big Twin, you can remove the geartrain from the transmission case without having to remove the gearcase from the engine. Basically

...by removing both plugs on the bottom. Once drained, disconnect the hoses going to the oil pan. Remove oil fill cap, remove two screws and remove the oil spout, pull up on the dip stick cover to ...

remove baffles on stock pipes will this hurt bike? or due i have to change complet exhaust and intake? Any change or modification to any of your vehicles systems can effect your bikes factory warranty

step by step proceedure to remove rear fender from 2000 fxdwg 1. Follow the taillight and rear turn signal wire harness to the 8-pin connector under the seat. Separate the connector. Remove the seven ...

Does anyone know how to remove the tank on a 2011 wide glide ? I am putting on a set of auxiliary lights, and then a have to remove the tank because of the wiring. disconnect the fuel hose, drain tank

how to change headlight assembly Remove screw(s), remove headlight cover/retaining ring, remove connector and remove bulb. Reverse to install new bulb.

how do I remove the front wheel from fxdwg What year??? Remove brake calipers if necessary to get the wheel out from under the fender. Loosen the axle cap bolts and remove the axle nut and washer and ...

Instrument Console removal Remove the seat. Remove the screw under the seat , remove the screw at the front. Lift up teh console and disconnect wires etc.

2002 Harley Davidson FXDWG Dyna Wide Glide carburetor jetting @ Should I drill more holes in the baffles before I rejet? ordered a cv perf kit for my Dyna, swapped out the stock muffs for SE slip on ...