remove the back cover. Then remove both side covers. They are on with plastic tabs on the sides. They will with some work pop off. Be sure NOT to break the wire to the speaker when removing the covers
...Remove the back cover. And looking from the back, remove the right side cover. There is a white ribbon cable and one connector with mostly red wires, remove and reseat those. Return power to the ...
...Remove the back cover. And looking from the back, remove the right side cover. There is a white ribbon cable and one connector with mostly red wires, remove and reseat those. Return power to the ...
...Remove the back cover. And looking from the back, remove the right side cover. There is a white ribbon cable and one connector with mostly red wires, remove and reseat those. Return power to the ...
remove the memory sticks from the main board, With the memory removed, turn the machine back on and let it come to ready. Power the machine back off, and reinstall the memory sticks, put the door back
...remove the back metal plate covering the main board, that is if I remember correctly 8 screws holding that metal cover on. remove the cover and set aside. Now look under the back edge of the scanner, ...
Question about WorkCentre Pro 412 All-In-One Laser Printer
...remove the back cover, which requires you lifting your document feeder out so you can remove the 2 phillips screws on the top of the back cover, then you remove I believe 3 or 4 screws on the back of ...
covers. Remove those covers, and also remove the one screw holding on the plastic strip along the back of the glass. Then remove the glass. Be careful cleaning the scan head. That lamp is very fragile
...Remove BOTH memory sticks. With the memory sticks removed, turn the machine back on and let it come to ready. Then reinsert the memory sticks and power the machine back on. Second, Go to Xerox.com. ...
Question about WorkCentre M20 Black and White Copier
back cover on, and remove that cover. Look under the edge of the scanner at the back. You should use a magnetic phillips screw driver, but under that ledge you will look back about 3 inches, There are
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions