Questions & Answers for: Nissan how to remove back

Question about 1989 Pulsar

2 Answers

...back, do I need to remove the headlight cover? If so after removing the 3 clips what else do I need to do? you need to replace it from the back, if its not accessable try removing afew things if not ...

Ad

Question about 2007 Altima 3.5 Sedan

1 Answer

...back and remove the two bolts at the front of the rail. Once the bolts are out removed tilt the seat towards the back, it should lift the seat bottom easily and you can find your flash drive. Be ...

Ad

...Remove battery cover located under the hood on the passenger side in the back. Simply pry the plastic catch in the front, open it like a lid and jiggle it loose and set it aside. Use the small flat ...

...the black plastic trim panel around the radio. Remove the screws and pull the trim panel back. Remove the four screws around the radio, unplug the wires on the back of the radio and you are

...back. Remove the seat back. Remove the large metal support panel that is behind the seat back. Safely jack up the rear of the car and support on jack stands so the rear wheels hang free. Doing one ...

...of the assembly. Carefully pull or pry backward to remove the assembly from the body of the car. Here you may access the back of the affected bulb. Simply turn to the left and remove/replace the

Question about 1991 Maxima

1 Answer

...(power steering or compressor ) back to create tension on the belt before you tighten back the bolts.. PS TAKE CAREFUL NOTE THE POSITION YOU REMOVE THE BELT FROM AND REPLACE NEW ONE

that didn't pull back. Pull it back. You will see a nut, or a screw, to remove arm. Take note of wiper position beforeyou remove! They have to be put back exactly, at the same angle you tookk them off

...remove back seat in a 1995 Nissan Maxima Rear See Figures 3, 4, 5 and 6 Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward ...

...Remove rear seat back by tilting forward and pulling straight up. To install: Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm). Install the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,587 Questions

2003 Nissan Altima
2003 Nissan Altima

1,450 Questions

2000 Nissan Maxima
2000 Nissan Maxima

1,309 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,122 Questions

2002 Nissan Altima
2002 Nissan Altima

1,306 Questions

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...