...remote wire wasn't constantly sending enough power to keep the amp on. Also check your ground wire. okay i had this same problem. i checked the 12V wire, it had power going through it. i checked the ...
wire connected to the vehicle) and the head unit on (so the amp will have remote voltage applied), touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11
...remote, and cd player cables are plugged in, no lights are on, when i plug in the ground wire, the power comes on along with the problem light. I can't get it to work and would appreciate any advice, ...
Question about UL-2200D Car Audio Amplifier
remote blue wire stereo & amp ) the power light on the amplifier goes on, after 5 seconds shuts off, i had run a 10 gauge wire directly to the 12 v battery in a honda civic. also if i bridge the power
Question about UL-2200D Car Audio Amplifier
...wire going to the amp remote terminal with a voltmeter. If it shows 12V when the radio is operated in tuner mode but 0V when you switch to CD, then check the wiring. If this is the cause, and your ...
Question about UL-1600M Car Audio Amplifier
...remote wire supose to be connected to? The remote wire is supposed to be connected to the remote output on the back of the head unit that is feeding the amp. Without the remote wire hook up the amp ...
...wire for main power ground and remote. You may want to double check what is written on amp for the size to put in there. Technically you can put a 100A onto the wire if it is big enough and the fuse ...
amp itself have to be bolted to the frame as an additional ground? any other ideas? fusable link? Sounds like you have a weak signal on remote wire. If tou placed a jumper your amplifier is staying on
al-811 does not power up when i turn power on Use a test light or Multimeter to verify that you have at least 12volts on your remote wire as well as your Power cable.
Usually answered in minutes!
24 Questions
4 Questions
2 Questions
5 Questions