...remote wire/the amp.only works when the power wire is connected to both remote and + terminal,but does not work without remote wire.Is there some lack of power from the remote wire.the amp works fine ...
...remote wire to the amp. Alpine has two remote wires. BLUE (only) This is the pwr antenna remote wire,every time you insert a cd this remote wire,the pwr cut out. BLUE/WHITE STRIPE This is the AMP ...
remote wire The amps stay on when I turn the car off and also they cut off when I unplug them from the remote wire You have the REMOTE wire hooked to a constant +12V source. The remote wire is ...
Question about Hampton Bay Universal Ceiling Fan/TV/DVD/Satellite Remote Control
...remote ceailing fan and light i tried push on light key - dim light low to high working but fan isnt working hi to low. i checked the supply wire red, white and black so i have a installing receiver ...
Question about 54 In. 5-Blade Fan, Chestnut, Autumn Mist
wire a remote control ceiling fan, without using remote. I purchased a Hampton Bay "Caswyck" 54" ceiling fan. It comes with a hand held remote control. I do not want to wire it with the remote control
Remote wire? I need to connect a "remote" wire from my JVC KD-G441 headunit, to my amp in the back. But I don't know where the remote cable should be drawn from, on the headunit. There is no remote ...
...Remote wires = Neutral in(Black) white ceiling wire, Live In(Black) blaxck ceiling wire, Light out(White) blue Fan/Light wire, Fan out(White) black fan/light wire, Common(White) white ceiling and ...
...remote wire or anterna wire. Details below. A relatively common problem is installing an amplifier with a factory head unit or other head unit without a remote turn on wire (or a burned out circuit). ...
Question about VZ709 Car DVD Player
wire and connect directly to the remote terminal on the PCB. If the unit works using the remote, then the wiring is at fault. If the unit does not work, then the remote is at fault. Did the unit go to
...wire remote for a Guardian RV generator 7500 1. Locate the remote wiring harness on the generator. This will be a bundle of wires with a plug on the end. 2. Connect the plug on the end of the remote ...
Usually answered in minutes!
360 Questions
288 Questions
312 Questions
218 Questions
215 Questions