Question about Security and Remote Start System (basic install included)
...remote · release valet switch · turn key off I just bought a replacement 473V transmitter and it came with instructions on the box. To program a remote with only 3 buttons and the ...
Question about Security and Remote Start System (basic install included)
button. 5. While holding button push either lock or unlock on keypad of new remote. 6. Siren or horn should sound. 7. Let go of valet button and turn key OFF 8. Test remote 9. Smile and grab a shake ;
siren will chirp. While holding the the valet button, press and release the the lock button on the remote. siren should respond with a long chirp. Release valet button, trun off ignition, test remote
Question about Directed Electronics 479V Remote Gen 2 Responder
...if it goes into valet with no problem then the alarm is fine, then you can re-program the remote. if it doesn't go into valet then the problem may be the alarm and not the remote. hope that helps, ...
...on, press and release valet switch one time. Press and HOLD valet switch, press lock button on remote. You will hear a confirmation chirp when the remote is programmed. Turn ignition off. Test
Question about 791XV The 791XV is a 2-way Security and Remote Start system. Th
...valet switch, press lock button on remote. The alarm should chirp to confirm entry into the programming mode (when you press and hold the valet button) and when you press the lock button. Turn ...
Question about Security and Remote Start System (basic install included)
...valet remote push-button to access the channel that you want to program: once for "Arm/disarm," twice for "Trunk Release" and three times for "Remote Start." The valet push-button is usually located ...
Question about 5900 SST 2-Way Security System / Remote Start System with Responder S
...remote system if possible The car's computer wont let it start?Well, if you changed the battery and the viper alarm is the issue; locate the push button valet/programming switch. Turn the ...
Question about Remote Start System
...open door, turn ignition on. Press and release valet button one time then, press and hold valet button. While holding valet button, press lock button on new remote. Turn ignition off. Test
Question about Directed Electronics 479V Remote Gen 2 Responder
...valet button once then, press and hold the valet button. press the lock button on the remote. Vehicle should respond with a chirp from the siren. Release valet button, turn off ignition, test
Usually answered in minutes!
130 Questions
5 Questions
7 Questions
1 Questions
1 Questions