Questions & Answers for: Avital is my remote a valet remote

...PROGRAM THE AVITAL 473L REMOTE? It should be open door turn ignition on press and hold valet switch until it beeps once let go press once more and press lock on fob let go of buttons turn off ...

...that is the process for "remote valet". If that does not work, turn igniton on then off, within ten (10) seconds, press and release the valet switch. The LED will go out if the system was in

...starter? The Zs mean that the alarm is in valet. To exit valet with the remote: open any vehicle door, press lock,unlock,lock. The zs should disappear from the remote allowing you arm the

my alarm is in valet mode and silent, need to get out valet mode, how? Open vehicle door, press lock, unlock, lock on the alarm remote.

...The manual gives no instructions. Thanks Turn ignition on, press and release valet switch then, press and hold valet switch. Press button on remote. Release valet switch, turn off ignition. ...

...has stopped working What could be the cause of this? The remote start has stopped working. Nothing happens when either remote is used. Check fuses on control box. Make sure it is not in valet

...remote has been programmed. 6. Release the Valet button, and turn the key to the Off position. 7. The horn sounds one long honk to confirm that remote programming has been exited. The programming ...

...remote start works fine but depressing the brake does not shut it off. Do you have any suggestion as to a fix. By the way I do not have a valet switch. it still might have a button combo that might ...

...remote and through the Valet button. The alarm is equipped with Starter Kill, so I believe that's what is the issue but I'm not sure. Is there a way to disable this? Make sure you are using the right ...

remote starter into valet mode. Press and hold the "Lock" button on the remote starter until the parking lights flash twice. This will turn off the chirping feature. Press and hold the "Unlock" button