...Start) then back to OFF. D. Remove the key from the ignition. 5. Press any button on remote for a minimum of 1 second. System should now lock and unlock doors once. 6. Close and open drivers door. 7. ...
...start over and go slower. 10. Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. ...
...start over and go slower. 10. Close the door. 11. Open the door. 12. Press the lock button on the remote. The locks should do a lock-unlock cycle. 13. Close the door 14. Press the lock button on the ...
...start over and go slower. 10. Close the door. 11. Open the door. 12. Press the lock button on the remote. The locks should do a lock-unlock cycle. 13. Close the door 14. Press the lock button on the ...
Question about 2002 Explorer
...unlock as expected from remote or unlock button on interior front doors. The drivers door does unlock from the interior handle, but you can hear a friction sound. need to replace door lock
...door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door ...
...Remote Start WIRE COLOR POLARITY LOCATION Battery RED/WHITE (+) IGNITION SWITCH HARNESS LOW CURRENT, FOR HIGH CURRENT USE RED/BLACK AT VEHICLE FUSE BOX Ignition 1 PINK (+) IGNITION SWITCH HARNESS ...
Question about 991 Responder LC3 SST Security/Remote Start System
Remote start work but door will not unlock or lock! Hi, i have a 2008 Toyota rav 4 and today i used remote start and the car start up but when I press unlock to open the car door it will not unlock ...
Question about 991 Responder LC3 SST Security/Remote Start System
...remote- still not openning doors. Help Please! Try reporgraming it 1. Start with key out of ignition, drivers door is open all others closed and drivers door is unlocked. 2. Insert key into the ...
Start) then back to OFF. D. Remove the key from the ignition. 5. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions