Questions & Answers for: relay switch

Ad

Question about 10-amp Relay Wall Switch

1 Answer

...Relay Wall Switch This is not about an RTO switch, but FixYa won't let you post without a product... I have a relay wall switch or power relay that is working intermitently, and I would like to ...

Ad

relay on 1999 ford explorer does not lock with switch does open with switch Found this answer in anotherr forum and works for me.Power Door Lock Relay Location Aux Relay Box #4 is in the rear driver's

Ad

...switch, starter relay 6*=20A Transfer case relay 7*= NOT USED 8*=20A Auto Ride Control Switch/on off switch 9*=40A Auto Ride Control relay 10*=30A PCM power relay mini fuses 1=10A A/C relay 2=20A Aux ...

Question about 2003 Explorer

1 Answer

...switch, starter relay 6*=20A Transfer case relay 7*= NOT USED 8*=20A Auto Ride Control Switch/on off switch 9*=40A Auto Ride Control relay 10*=30A PCM power relay mini fuses 1=10A A/C relay 2=20A Aux ...

...relay switch the same as the brake switch? My brake lights stay on when the pedal isn't pressed down No, the switch is above the brake pedal and the relay is under the hood. The problem can be either ...

relay switch in 2000 Volkswagen Beetle trying to find the fan relay switch the fan relay switch is under the drivers side dash, you need to remove panel, then slide upside down to view relay switches,

switch on I hear a relay sound inside the car but nothing happens? A relay is a fancy word for a switch. Your interior switch sends 12 volts to the relay that activates the relay (turns on the switch)

...switch is bad. If the relay checks are good, check for power on the small wire to starter with key held in start. If you have power there, the starter solenoid must be out. Had this happen to me and ...

Question about 2003 Explorer

1 Answer

...switch, starter relay 6*=20A Transfer case relay 7*= NOT USED 8*=20A Auto Ride Control Switch/on off switch 9*=40A Auto Ride Control relay 10*=30A PCM power relay mini fuses 1=10A A/C relay 2=20A Aux ...

relay switch contacts. Since the wiper 2 relay switch contacts are normally closed to the low speed circuit of the windshield wiper motor, the motor will operate at low speed. Low Speed Operation When

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Gene Haynes

Level 3 Expert

5391 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...