Questions & Answers for: Jeep Grand Cherokee relay bracket

bracket for the bumper cover. And then there's the easy way. Remove the right headlamp housing and right about the middle of the cover underneath where the housing was, smack it with the ball end of a

can't locate the cooling fan sensor or relay. I'm helping a friend with her 2000 Grand Cherokee. The engine fan won't come on. The fan works when jumped to the battery. The 40 amp "fuse" in the fuse ...

...relay is under the right front headlamp assembly and bracket. You can access it two ways. Remove the front bumper facia, headlights, and bracket assembly. The grill is part of the facia and the ...

...bracket assembly. It is made of a hard plastic material and the relay is bolted to the fender area underneath. If you are refering to the cooling fan relay, it is under the right(passenger side) ...

...relay. It lives under the right headlamp below the plastic bracket that holds the headlamp assembly. You can do this one of two ways. Remove the bumper fascia, headlamps, and bracket that runs across ...

...relay on 2002 Grand Cherokee 6cyl. It lives under the right headlamp below the plastic bracket that holds the headlamp assembly. You can gain access one of two ways. Remove the bumper fascia, ...

...relay is mounted It is mounted to the sheet metal directly under the right headlamp assembly and bracket. You can remove the front fascia, both headlamps and the bracket (the bracket runs all the way ...

relay and you can see the bracket part below and between the battery and front frame toward the front of the car. With the headlight assembly out, pry the white ball socket fittings and oiled them for

...a choice on where an antenna got stuck, it definitely would be in the up position. There may be a relay in the line that has failed but most often the problem is inside the mast motor itself. There ...

...relay now air bag light stays on The airbag light will come on and stay on as long as there is an active code in the system, this means that something is malfunctioning right now so we will turn the ...