Questions & Answers for: Sony regulator ic

...regulator ic from power supply,i whould like imformation of ic number If the IC your talking about has a designation number of IC601, the number is MX0841AB-F. Common regulator IC. Sony says that IC ...

...regulator (maybe 7812 or 7912) problem. In my case the problem was cracked soldering joints on the little PCB where the IC was soldered. Try this: open the case; on the sides of the big heatsink are ...

...won't turn on at all now. i get 6 blinks. This is a deflection problem, you must have two IC's replaced on the D_Board. They are regulator and Chopper ic that regulate power to High voltage

...regulator normally Sony uses STR***** type IC regulators, which will be screwed onto a metal heatsink to radiate heat from it while it works. These will heat up to 80 degree C, while working, and the ...

the standby comes on and off It has a shorted ic check the convergence ic it has marking of stk and the regulator str.

sony trinitron, about 7 years old, turn it on and picture won't come on for about an hour Check for bad connections on voltage regulator ic, or bad voltage reg ic in power supply.

why is my tv in 3D? The convergence is regulated by two ICs. When the convergence ICs become faulty you get colors not matching and shapes show kind of colored halos that may resemble a 3d effect.The ...

...IC the the D power board and what is a D power board thank you Hello"D" power board is nothing, but its power regulator board itself.  I think you are not handy to do the work with power ...

what is the parts number used in sony kv-21bmr1 ic regulator? There are three IC regulators. Out of which ones number do you want? Circuit section? Position?

...please remove amp board or amp output ic I thing it will turn on if on then replace amp ic other wise check all voltages if any voltage is missing then replace related regulator ic thanks M ...