...CORDLESS PHONES WHILE TALKING ON PHONES, IHUNG UP AND HAVE'NT BEEN ABLE TO ANSWER SINCE. I GET INCOMING RINGS, BUT UNABLE TO ANSWER ANY OF THE PHONES. UNABLE TO GET DIAL TONE. Registering Handsets to ...
Question about 5.8GHz Expandable Cordless Phone System with Digital Answering System
cordless uniden to 5.8 unidenGHz base If the handset has previously worked with the base - press the hangup button and the # key at the same time on the handset for five seconds and follow the prompts
...cordless handsets. Handset(s) supplied in the box with the phone base are pre-registered at the factory. If you purchase an accessory handset, you need to register the handset before use. Only one ...
Cordless phone Handsets # 3 and 4 will not register with my TRU9466 base. The manual recommends ''Resetting'' the handsets by holding down the [end call] and [#] keys for more than 5 seconds until the
...cordless phone says "to register see owners manual for help" How do I get the phone working, it is a uniden DECT 6.0 Model DECT 1588-2 With the phone in standby, press MENU/SELECT on the base. Move ...
...cordless DECT 1580. Manual says select command 8. How do I find Command 8? thanks, joan Hi, please follow the instruction to register the handset to base To register a DCX150 accessory handset: 1. ...
handset cordless phone only the main base phone work the other two says connecting when you turn it on but it wont connect it have loss its connection with the base phone Often the handsets must be re
Register Accy and then press and hold # on the handset for 30+ seconds. (You will see Registering followed by Registration Complete.) Additional Uniden cordless phone manuals are available here: http:
...cordless phone. With some Uniden phones, a registration problem can be cleared up by disconnecting the battery and then reconnecting it before attempting to register the handset. (Make sure that you ...
Question about DECT 6.0 Cordless Telephone Expansion Handset
...'Menu' button). Do it again, but select "base unavailable". After that, set them in the base (not the handset charger) and they should register with the base. This works on most Uniden model
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions