Questions & Answers for: register the base

...base register unable to register the twx977 submersible phone to any base. It came with the Tru9485 series. Please help. push menu on base station - select register phone push # sign on twx977 phone ...

...REGISTER ENTRE BASE NUMBER AND WHEN IT REQUIRED PINCODE ENTRE 0000 IT WILL WORK One year old GE 5.8ghz has do not disturb on the info window and does not ring when we recieve a call. Manual not ...

...register the new one??. The "END" and "#" key combination can be used for several purposes: 1) If wanting to use an ALREADY REGISTERED HANDSET on an alternate base, and if if the INITIAL BASE isn't ...

...base unit, register the handset. 1 Handset: {MENU} i {#}{1}{3}{0} 2 Base unit: Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L If all registered handsets start ringing, ...

register your new hand set. I found I did not have to deregister it. I just went to the new base unit to register it and when I got the Message."move closer to base unit" I hit OK and it registered it

...register it to the CS6229-2 base? Yes. The'old' handset must be de-registered from its original base and then registered to your base. NOTE: the CS6229 handles a maximum of 5 handsets. If you have a ...

base and re-register it to your base. 1. To de-register the orphaned handset from the old base: When the orphaned handset says "Connecting..." or "Out of..." enter *331734 [menu] and it will soon beep

...register them on the second base, the settings for the first base is lost. It also changes the handset numbers making internal calls impossible. The very poor manual mentions that it is possible to ...

...register the base phone but i can change another phone on this three phone set and it is registered and the phone that did not register is still not registered in another cradle how do i make the ...

...base unit. Register SynJ SB67108 Handset How to register AT&T Synj SB67108 to new base unit SB67138? To register an AT&T SynJ SB67108 handset to a new SB67138 base unit, you will need to ...