Questions & Answers for: Poulan reed valve

reed valve is very stiff and doesn't seem to open to let gas into the engine. The exhust port is clean and there is good compression and spark. Has a new spark plug of the correct type. Any ideas? its

...reed valve not sealing off because I see fuel seaping onto the reeds (Poland chainsaw with Warbro) [email protected] No response to clarification. The needle valves are really sensitive If you ...

...reed valves are stuck take off the aircleaner and spray some carb cleaner in the port if you still have problem do it to the exhaust port take off the mufler that will help of they are working put a ...

...reed valve had failed. See no reed valve in the parts list from Poulan. Suspect one of the carburetor "gaskets" performs this function (the vitally important one-way valve into the crankcase that ...

...reed assembly from closing. This is a check valve that keeps the gas going in one direction... into the engine as the piston goes up and down. It's located just below the carburetor. Maybe a piece of ...

...I don't know but an intake reed valve is usually fitted directly to the intake port at the base of the cylinder barrel or crankcase and is revealed when the carburettor and any adaptor is

...everything checks out with fuel and spark. I think your chainsaw has poor compression. I would inspect the REED Valve first. check exhaust screen --clean it if carboned up also would check ...