Questions & Answers for: reddy heater igniter glows gets

...shorting out to ground BEFORE the plug. gap should be 75 thousandths. Ive got 40000 reddy heater 1yr old. plug it in the ignitor glows and fan starts turning, but no fuel comes out. then it shuts ...

Reddy Heater will not ignite flame Have an older Reddy Heater Pro 110. Some years ago it was being used and ran out of K1 fuel while being used. If you plug it into the outlet (with a full tank of K1)

...Reddy Heater 60 that has been used very little (less than 2 gallons of fuel). I purchased it in 2001 and it worked that winter. I haven't been able to get it to run correctly since. I dismantled it ...

REDDY HEATER 125T WON'T INGNITE I HAVE A REDDY HEATER MODEL 125T THAT WON'T IGNITE. THE IGNITOR WAS BAD AND THE FUSE WAS BLOWN, REPLACED BOTH WITH PROPER NEW PARTS. WHEN TURNED ON THE FAN RUNS AND IT ...

...Reddy Heater Help! I have a R155A Reddy Heater that will not ignite the fuel unless I unplug and plug in the unit several times (3-4). Once this procedure is done the unit will fire & run perfect I ...

...heater pro 155 owners manual? plug in, fan starts for 3 sec then unit shuts down. Getting fuel no ignition. If this has a hot surface igniter, can you see it glowing? If not the igniter could be bad ...

heater will not light, i have followed the instructions ,turning thermostate all the way up first,and turn on now what happenes is the glow plug or igniter gets red hot the blower kicks on fuel sprays

...reddy_heaters . My tip will link you to the place to get the parts you need as well as how to perform the additional maintenance that these heaters require. Thanks for using FixYa and for the ...

Reddy Heater 50,000 btu kerosene heater does not ignite when turned on and shuts off after about 4 seconds. Could it be that it is too cold? It has been in the garage during freezing temperatures, but