Questions & Answers for: red line bottom sharp television

...red wire protruding from its top which attaches to the top of the picture tube with a suction cup. On the flyback there are 2 controls, the bottom one is screen and the top one is focus. Turn the ...

...red wire which goes to the top of the picture tube. There are 2 controls on the flyback transformer, focus (top) and screen (bottom)Turn the brightness and contrast all the way down and then increase ...

...bottom bow down and up need help Had the conv. bored fix and still doing it. sounds like some of the 3.9ohm 1 watt resistors are open some will get destroyed when the ICs go out and you can tell by ...

...line doesn't appear all the time. It's not even a year old...please help! my maxent plasma tv has the same problem but it has green and red lines. I found out that hitting the tv from the back works. ...

...line as described is the result of a lack of horizontal deflection (to move the beam from side to side) Since the high voltage is obviously OK, the problem is most likely a bad solder connection in ...

...red line in the center of screen fron I have thin red line in the center of screen from top to bottom on my sharp LCD, LC32BD6X, 32in Hi, If the line is present on all inputs, it is most likely a bad ...

...bottom. I cam watch a show but, when the screen is dark the lines show up. they are sharp thin lines curved from edge to edge on the screen. Started with white and now I can see red also Not that you ...

...red flashing won't stay green Hello, not 100% positive what the issue is with your set. But, if you are looking for a great source for parts, try out a company named ShopJimmy.com. They have been ...

...red,white and yellow jacks. No luck. I have never had a problem with this television until now. PLEASE HELP! T'Con board problem. If you wish to get some details; check the site linked here. Pull up ...

...red when showing the human face. the right side is perfect for about 4 inches and there is a line through the bottom. we checked the connections on the inside and they seem to be ok. we also tapped ...