Questions & Answers for: Sony red key

...to connect the YELLOW wire to constant power line,this is the wire it keeps the memory for you radio. The RED wire is connected to the ignition key so when you remove the the key the radio shut ...

...key lights in red. - press the following keys on the Remote commander in the following order for less than five seconds each: RESET, left arrow key, right arrow key, ENTER Hi Dear, Give Power to ...

...KEY BOARD.WITH TV ON ,TURN THE RED SCREEN CONTROL COUNTER CLOCK WISE A HAIR.I BELIVE IT THE CONTROL ON THE VERY LEFT.TURN SET OFF THAN ON, TO SEE IF THAT SOLVED YOUR PROBELM.IF IT NEED NOT THAN TURN ...

...red light blinks, it in a ventalated area and does not feel hot. It might be a problem with your coolers. To test it, turn the key behind the console off, then hold the eject button and turn the key ...

...Red is aligned press the + key again and the [ ] will turn blue. This indicates it is now ready to adjust the blue convergence. 9) Use the arrow keys to move the blue cross on top of the white one or ...

Everytime I snap a picture, the camera flashes three times. Help! The camera is in Red-eye Reduction mode. The preflashes are intended to get the subject's pupils to contract, reducing the red-eye ...

...red led flashes twice. 5. Press 994 6. Press Magic key (don't hold) 7. Press 00189 8. Press 1 ( this sets it to key 1 - it flashes twice, if not repeat steps 4 to 8 ) 9. Hold the magic button until ...

red(repetition rate of 12 flashes). After pressing I/O key-ON/Standby LED flashes in green(few seconds) and return to flashes in red(repetition rate of 12 flashes). A Flashing Red ON/STANDBY LED means

...red and yellow cable in the yellow slot (if that makes sense) That gets the power working however it will not remember the time or saved radio stations...can anybody help? it sounds like your yellow ...

...RED............+12 Volt Ignition wire (supplies power only when key is ON) YELLOW.....+12 Volt Battery wire (this is the wire which retains memory and should be connected to constant power) If you ...