Questions & Answers for: recognise cartridge try installing again

recognise the cartridge although it is a genuine canon original. unplog the printer.open the catridges & put it again.check printer properties.if it shows the catridge it's all ok. else re install the

...My printer is definitely a Canon Pixma MP 150 printer. This is the first time I have tried the 'high yield' cartridges. have u tried to remove the cartridge again, proably some contact ...

...recognise it as i have done this several times before. Sometimes even when an ink cartridge has been refilled to capacity, your printer still registers it as empty. This is because your printer ...

...recognise change of cartridge Is it working perfectly before installing new cartridge. Try to turn off and reinstall the cartridge again. Also shutdown the PC. Then power on PC & then Printer. Let me ...

...cartridge with an approved epson T0711H.Now my printer says it cannot recognise any of the cartriges and is giving an error message to that effect.I have taken the cartridge out and tried again and ...

Cartridge won't recognise I loaded a new cartridge, tried to carry on printing and it keeps coming up with "ink cartridge not installed properly" however i have taken them out and put them back in ...

...recognise that one is there. When the print cartridge contacts are dirty and the printer cannot detect/communicate with print cartridge. Clean the contact points on the cartridges with a dry, ...

...recognise and will not print. Also flaging up empty after a very short period of useage. Solution return to retailer or is there a simple fix??????? Try reinstalling cartridges make sure you remove ...

...cartridge, make sure they have ink on them. If they are new, remove any plastic covering on them. try to shake the ink a bit. with the printer turned off, unplug it from the power outlet, pres the ...

cartridge (do not turn off printer).. then wait for 15 minutes...then again put cartridges in head... then press start..start...start..It will recognise on 2 to 3 tries.. Works on Epson TX210,200,410.