Questions & Answers for: Chrysler PT Cruiser how to recharge my ac

...low on...no, not coolant! The AC system is separate from the coolant system. The AC needs to be recharged with R134A, a special refrigerant used only for air conditioning, much like the old Freon ...

...AC system is low, possibly depleted. I would go have that checked out, there is not much that you can do personally unless you are liscensed to handle/recharge refrigerant systems, if in that case ...

...ac recharge-ac was blowing cold air out when car moving but warm when idle-was told a need a new compressor, drier, and liquid line. $1400. Think this might be a money scam, as it was working fine ...

...recharge your AC system. If not, most service stations will recharge the system for under $100 but be aware that they are mandated by law to detect any leaks prior to recharging the system. If a leak ...

recharge the AC with some freon or what ever they use. Some models you can buy a can of it in the auto parts stores orwalmart and do it yourself. If it keeps cool after that then problem solved. If it

...are available to both diagnose the leak and recharge the system) if you're unfamiliar or uncomfortable with doing it yourself, it should be serviced at an authorized service station that does AC

...ac is blowing hot air after a recharge and.... my 2003 pt cruiser ac is blowing hot air i got a recharge still blowing hot air my uncle hooked up the computer u kno the one that scans the car for ...

...side connection located to recharge the ac on a 2005 chrysler pt cruiser i need to locate the low side connection in order to recharge the ac It is in the larger of the 2 AC lines from the

...AC could possibly need recharged. This is another thing you can take to a local shop that does air conditioner service. Watch for a special to test and recharge for 50-60.00. If it isn't just a ...

...ac switch? The legal method is to evac the freon into a recovery station, then recharge. Its possible the pressure switch is mounted on a shrader valve and you can remove the switch without loosing ...