Questions & Answers for: receiver volume motor

Question about KRF-V5060D Receiver

1 Answer

...volume knob of the receiver blinks, so it is getting the signal. Could this be the motor of the volume knob, if so, is this an easy fix, or does it have to be done by a repair shop? Thanks I hope ...

Ad

Question about KRF-V5060D Receiver

1 Answer

...Below picture shows how is motor board and what drive IC is to power the volume motor. You need to check voltages at pins and replace bad IC. It is very simple circuit and easy to repair. Good

Ad

...know is if it's the remote or the receiver. Do you have another remote in the house that could send compatible commands to the receiver to prove if it understands and executes volume up/down

Question about TX-DS838 Receiver

1 Answer

...motor fan do not move The fan in those Audio System only turns at about 1/4 to 1/3 of the ride of your volume control. It had been intentionnaly designed like that, to achive a quiet operation at low ...

...the main volume is moter controlled not endless digital step level volume,m it could be a problem with the motor control circitry, take it to repair guy along with the renote to isolate the ...

...motor on the volume controller knob unit. The digital output must be converted through the D/A converter to a motor driver to show the indication of volume . However if there is no change with the ...

...receiver itself in the volume control area? I don't believe the volume buttons on both remotes are the issue - since my dish remote adjusts volume on my tv and it works fine. I have opened up ...

Last resort is the volume control motor driven knob on receiver see if receiver is defective try with other inputs such as radio etc. Disconnect all inputs and see if volume increases? Hope this helps

Question about RX-V870 Receiver

1 Answer

volume with the knob on the receiver, but not the remote. Remote model number is RM-U302. Here's what I've tried: - New batteries in the remote, several times actually. - Removed batteries from remote

...a sudden stopped working and the volume is out of control. The motor on the volume knob could have gone... or the IR blaster or receiver. Do all the other elements work? Like channel, song skip,

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...