...receiver or the subwoofer, as i only have a very low muffled sound from the sub at very high volume, thanks. If the sub has a volume control, turn it down then turn up the volume on the amp to the ...
...receiver, the volume in the rear channels are way to low. Is there anything I can do to improve the problem? Channel level output can be adjusted in the menu if you have the remote. Set the rear ...
...volume first. The receiver itself offers volume control and you probably have that turned down. Then you are trying to raise it with the volume control on the TV. This is raising the TV volume, but ...
...RECEIVER Try cleaning the volume control with an electronics switch cleaner spray. If that does not resolve the problem and it seems to happen at low volumes more than load volumes, then the output ...
...LOW VOLUME FROM SORROUND SPEEKERs I have the Onkyo TX-SR605 and have adjusted the set up volume for these in the speaker menu all the way up and the volume is very low. The set-up ping is also very ...
Question about TX-SR605 Receiver
...volume gives very low audio while receiving Volume is on max but there is very low audio while receiving. This then changes and suddenly the audio is very very loud. This lasts only short time /some ...
...low volume on all chans.with the Denon avr 1907 low volume on all chans and inputs tried setup but still has problem.With the remote control only the volume adjust works could there be a fuse gone in ...
volume, its a overload protection for ohms short in receiver. unhook each speaker and turn balance to the one hooked up and turn up receiver if it shuts off do the same with other speaker to determine
Question about TX-SR576 7 Channels Receiver
...Receiver, Zone 2 left hand speaker cuts out on low volume. Changed speakers and completely rewired directly from receiver to speakers with no intermediate connection points, +ve & -ve double checked. ...
Question about ELite SX-A9 HI-FI Audio Receiver 70W SXA9J SX-A9-J
it by getting a different receiver. if it has nothing to do with volume then check your manual and settings for a auto standby feature that may be just putting the receiver to standby after a set time
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
