Questions & Answers for: Isuzu Rodeo rear wiper arm

one windshield wiper works and the other doesn't your other arm is either stripped out or the rod under neath the wiper arms are unhooked or fallen off

...wrong with the electrical or wiper motor, it has to be the arm itself, just tighten it down. Sometimes they come lose, especially if it is froze and etc. It could be that the linkage has come

...rear wiper will start up again for another 2 minutes. I have taken out the fuses to the rear wiper and washer and it will still do the same thing. I have taken the wiper blade off so it doesn't keep ...

wiper control arm that I replaced. I cant get the wipers to go in the correct direction. Everything look fine, but the pivot on the motor is probably not set right. Try disconnecting the wiper linkage

wiper arm there is likely a plastic cover or cap. When you remove that cap or cover there will be a nut that holds the wiper arm to the post. Align the arm back to it's proper position and tighten

rear wiper arm was broke off at car wash and now i cant find a replacement one anywhere. any ideas? Hi That rear wiper arm is a hard to get parts from any replacement store, the only one can supply it

wiper motor on a 98 rodeo the front or rear, no way for me to guess????? unbolt it and replace it. start at the arms and work inward works. ill toss coin land on front. ill read the FSM online for you

...Wiper arm moves freely by hand. will not cycle with the passenger side wiper. Common problem is that the nut holding the arm on has loosened. Right at the pivot point on the arm is a nut underneath a ...

rear wiper relays one more silly easter egg hunt, seems that is all we get. now....sad.. and guess what most cars have no such thing. ill pretend you did say that, and said "my rear wipers are totally

rear wiper control module. Im having trouble finding it... am I calling it the right thing? My rear wiper stopped workign because some person tried to use it on snow by hand instead of letting it wipe