Questions & Answers for: kawasaki ZX-12R rear sprocket

Question about 2000 ZX-12R

1 Answer

...want to weave .had new tyre fited hi this may because of alligment problem. the specification of rear and front tyre diifers a lot then this problem may occur. you can allign you wheel in nearest ...

Ad

Question about 2000 ZX-12R

1 Answer

An Oily dripping substance coming from the rear left side where the Rectifier sits. Sounds like the rectifier is overheating and the resin is melting, check the charging output maybe around 14v. If ...

Ad

Question about 2000 ZX-12R

1 Answer

rear sprockets as well. The sprocket teeth should have a rounded blunt end. Do the replacement of chain and sprockets and then see if the tambourine has gone away. If not, I would dissasemble the rear

Question about 2003 ZX-12R

1 Answer

zx12 sprockets torque settings Front sprocket's mounting bolt: 127NmRear sprockets mounting bolts: 59NmRear axle pivot's bolt: 125Nm

...I'm sorry if this doesn't help, but it sounds like a bad ground.Try checking the connectors for the rear brakes. Disconnect and clean each pin connector. If that doesn't work, maybe run a jumper line ...

where is the nuteral saftey switch wireing Try removing the front sprocket cover most likely around there

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...