...sprocket first, then fit the bar into it, then draw it out so that the chain follows the bar groove.The chain teeth must be cutting toward the engine on the bottom side of the bar. When mounting the ...
Question about , No.455 Rancher, 20" Gas - Powered Chainsaw
...sprocket cover off to remove the bar and chain while i had the chain break engaged. (idiot) NOW i cant get the thing back on. any ideas? It must be reset before you can reinstall it. This answer ...
Question about "Chain Saw - 16" Bar, 3 Hp
...rear of the bar (both sides, consider rotating the bar), if equipped with a sprocket nose ensure it rotates easily at least one complete revolution. Clean the saw oiler hole and channel. Insert a ...
...3-5 minutes the chain seems to bind and you can not turn it with your hand. have new chain,bar,rear sprocket chain rides in. does this sound like a clutch problem? saw is not oiling the bar/chain ...
It doesn't want to move in gear. forward or reverce. ILs there a shear pin in the gear case? Thank you David First off how handy are you i can tell you what it is if you can take it apart there is a ...
...sprocket, how can i find whatn model it is, many thanks Hi, you need to post a picture somewhere if i can see it, i will soon tell you what it is, or give me a very good discription of it, top cover ...
clutch and sprocket, re fit the brake onto the saw and use the hand guard to load the brake, pull it fully back toward the rear of the saw until it clicks and loads, now re fit the clutch and sprocket
...Rear tine tiller. Grinding noise from gear box while moving - under power or not. This machine has a fairly simple chain drive to the wheel axle shaft, there is a sprocket on the shaft itself, this ...
keep up momentum when tackling hills Gear it down a bit with a larger rear sprocket and a smaller front sprocket. Put a 13 tooth front sprocket on. http://www.cafehusky.com/threads/tc250-gearing.10683
...rear sprocket. Divide the rear sprocket teeth by the number of teeth on front sprocket e.g 48/14 = 3.43 a lower number means higher top speed 45/15 = 3.0 but compromised performance at lower speed. ...
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions