Questions & Answers for: Chevrolet Tracker can t read cds

Question about 2001 Tracker

1 Answer

Cat Monitor problem Read this my friend! http://www.fixya.com/cars/t1307778-1998_plymouth_breeze_2_4_liter_failed 2001 chevrolet tracker zr2 bad url.... have your o2 sensor checked or replaced

Ad

...rectangle sticker. the liter size is on that tag. Also in the top center of the engine it should read the word vortec. Just below that word it should read 1.6 or 2.0. That is the engine liter

Ad

Question about 2003 Tracker

1 Answer

check engine.light on 02 reading on scanner The o2 readings should be fluxuating between .010 - .099 volts when warmed up. If you get no reading from a sensor, then it's either the sensor or the ...

what is the 420 code on a 2001 chevy tracker P0420 - Catalyst System Efficiency Below Threshold (Bank 1) The catalytic converter has an oxygen sensor in front and behind it. When the vehicle is warm ...

Question about 2003 Tracker

3 Answers

...the time or the radio station either, just "ERR". I can hear it, like it's trying to read a disc..even when the car is off. Could this be a fuse issue or something? HI lisasmith566 IT ...

Question about 2003 Tracker

1 Answer

...in the alternator itself. when vehicle is off, at battery with all accesories off should read at least 12.6 or better. with running at battery if alternator and belt are ok should read

Question about 2001 Tracker

1 Answer

ligth "on"service engine soon p0116 Po116 is a code for coolant temp sensor out of range. I would check the temp sensor data with a scan tool to see what it is reading. If it is lower/higher than it ...

...What's wrong? it's the format that you are burning your cds in...read the info in your burning program to make sure you are making regular cds and not mp3 or aac or wma

...exceptions to this, like the fuel pump for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault ...

...neg. No the three wires are 1 battery voltage 1 reference voltage 5 volts 1 ground. these sensors read in Hertz so a low reading would indicate a leak in the piping. Low voltage could be due to a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...