Questions & Answers for: rca tv screen run channel

RCA unit. It searches and scans for channels, but none comeup after 20 minutes. I've checked the RF cables and the wall cable connection. Why is it not working?? make sure you have tuner as input---if

rca input. The tv is looking for your source ,hook up your regular source, and see what you get. The tv needs to see a source,of some kind. Try hooking a vcr to the cable connector on the back, play a

...tv in without the CATV cable, that worked for me and was able to get into menu and have it reset for all the QAM channels My grandfather's RCA Flat screen 28'' is connected to Bell currently. When he ...

tv or can i do it from the remote? Hello. It sounds like you need to change a setting before running the auto or channel scan. On the same menu screen that has the option for running the channel scan,

...input that box is connected to if by a cable its usually 3 or 4. if by hdmi or rca cables its an input channel. also make sure not cables are loose try that first before unplugging the tv let me ...

screen menu and select TV or Tuner option. (This varies by model.) Highlight Tuner Mode and select the correct option: Antenna-over-the air signals from an antenna Cable-direct from the wall cable TV,

RCA antenna, I use the air to run a scan, but it wont pick up the local channels, I switch antennas with one on my tv which works fine, but it doesnt work on the prizmo either....any suggestions? http

...run auto scan Where is your antenna hooked up? Thru a cable box? Direct to tv? Completely describe setup, maybe post photos I imagine you are simply running a normal channel scan. It only finds ...

...tv has a message to please run auto channel scan but i dont have the rca remote Try doing a hard shut down, unplug it for a few mins and see if that helps. Usually you can use the menu, input, volume ...