...TV back together. You can also hook up the speakers to an unused RCA input using the same sort of method. This way you can hook up an amplifier or receiver to an RCA input to send signal to the TVs ...
...TV and solder to the respective RCA connections on the back or side of the TV you can treat the speakers passively, meaning there must be some sort of amplifier to power them. You could also just ...
Question about 19LA25Q 19 in. LCD Television
TV BACK. BUT DO YOUR SELF A FAVOR TO SAVE YOU SOME TROUBLE LATTER KEEP THE POWER BOX UNPLUGGED WHEN NOT IN USE IT GETS PRETTY HOT EVEN WHEN ITS OFF, UNPLUG FROM THE LITTLE BOX OR FROM THE WALL. BUT DO
...RCA and GE TV sets use a four digit code to control the v-chip. The code reset procedure is different depending on the model. Try each method until you find one that works: Hold down MENU on the ...
Question about PA-32JK1A 32 in. LCD Television
...tv itself) Check the physical CONNECTION of all cables by removing each wire bare or RCA and reinstalling it (Each power cable as well), once you have removed one cable, check it for fraying, and if ...
RCA truflat tv locked and is on standby mode. I have a universal remote but the remote will not work if the tv is on standby I need to find out how to unlock the tv with out the remote so I could turn
Question about RCU410 Universal 4 in 1 Remote Control, Controls TV, VCR, DVD and cable, Menu support, Code saver, Code seascans, Sleep timer, Backlit keypad, Easy and convenient with all the buttons needed for control 410 410
...tv and want to bypass the standby mode with remotech universal remote need the code need code to unlock standby mode Set-up (Programming) procedure is too much to type in here, and is not practical ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
