Questions & Answers for: rca turntable repair

turntable. What could need repair? It's more than likely your tonearm or your RCA cables. Does the sound come in at all? Try wiggling the RCA cables. If no sound whatsoever, then more than likely it's

turntable is about 8 years old. More than likely your RCA cables are going bad, and will need to be replaced. Not the hardest self-repair, but you will need to have some soldering skills. In addition,

...Turntable repair I am looking for instructions on replaceing the RCA cable of one of my Technics SL-1200MK You can visit our Do-It-Yourself repair video site: djprolab.com - for Technics Repairs - ...

...1200s is the RCA cables and the tonearm. I would first replace the RCA cables to a better quality set. - OPTiC Technics Repair Videos Technics Turntable Repair DJ Equipment Sales Technics Parts ...

...RCA cables need to be replaced. Torque, Serato, and all digital dj programs require a clear signal path coming from the source (turntable, cdj, etc). If it does not have a clear signal, or 1 side is ...

turntable rca Victor 1 emp 2kk is getting no sound because the electron tube 25L6 is shorted out, or not working...replace...take the 4 screws off each side of player lift out unit ..and replace tube.

rca's changed cause of break in the wire. Can I do this myself or Do I need to have a repair shop do it? On my SL 1200 MK2 you could try cutting off the cables leaving enough to strip them back a bit,

...RCA Cable for my turntable. How do I open the turntable base to replace the RCA Cable on my 1245? I have replaced connectors several times, and continue to have one channel or the other going dead ...

how to repair the rca chord that goes into the how to repair my technics sl1200 rca chord that goes into the mixer www.technics1210repair.co.uk

Hi, there is a hissing sound coming from my turntables, is it the RCA cable that connects to my mixer which is damaged? i tried to desolder it to change the cable but the small copper plate under the ...